HomeMatic HM-LC-Sw1-DR, Инструкция по установке и эксплуатации, Страница: 45 / 76

45
Function and device overview
3 Function and device overview
With the Homematic Wireless Switch Actuator 1-chan-
nel for DIN rail mounting you can switch connected
loads on and off. The devices can be controlled via
connected transmitters or a Homematic Central
Control Unit. Furthermore, the device is equipped with
a push button input which can be connected to 230V
push buttons that are used within the electrical instal-
lation to trigger impulse switches or staircase lighting
switches/time relays.
After teaching-in the device to a Homematic Central
Control Unit, the operating functions of the device can
be extended. The switching duration and delay can be
configured or connections to transmitters (e.g. motion
detectors) can be created and adjusted. Furthermore,
the actuator can be controlled based on time or dawn
via central control unit programs.
The module is mounted on a standard DIN rail within
distribution boards.
All functions of the device can be configured
with a CCU2 via the Homematic user interface
WebUI. The device can also be integrated into
the Homematic system and configured via the
Homematic Configuration Adapter.