Homematic IP HmIP-SK9, Инструкция по монтажу и руководство по эксплуатации

Страница: 55 / 175

55
Troubleshooting
sion time of any device is 1% of an hour (i.e. 36 seconds in an hour).
Devices must cease transmission when they reach the 1% limit until
this time restriction comes to an end. Homematic IP devices are de-
signed and produced with 100 % conformity to this regulation. Dur-
ing normal operation, the duty cycle is not usually reached. However,
repeated and radio-intensive teach-in processes mean that it may be
reached in isolated instances during start-up or initial installation of
a system. If the duty cycle is exceeded, this is indicated by one long
red lighting of the device LED
(D or L) , and may manifest itself in
the device temporarily working incorrectly. The device starts working
correctly again after a short period (max. 1 hour).
9.3 Error codes and flashing sequences
Flashing code/
display Meaning Solution
Short orange
flashing Radio
transmission/
attempting to
transmit/data
transmission Wait until the transmis-
sion is completed.
1x long green
lighting Transmission
confirmed You can continue opera-
tion.
1x long red light-
ing Transmission
failed or duty
cycle limit is
reached Please try again (see
sec. „9.1 Command not
confirmed“ on page 54
or „9.2 Duty cycle“ on
page 54).