38
Restore factory settings
9
Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the key ring remote
control, please proceed as follows:
• Open the battery compartment
(G)
at the rear
by pushing the battery compartment cover away
from the device. You will need to apply some
pressure to do this (
see figure 2
).
• This will open the catch and the battery compart-
ment cover can be opened (the cover remains at-
tached to the housing).
• Remove a battery.
• Insert the battery ensuring that the polarity is cor-
rect
(see figure 4)
while pressing and holding down
the system button
(F)
for 4s with a pointed object
(e.g. a pen) at the same time, until the device LED
(A)
will quickly start flashing orange
(see figure 5)
.
• Release the system button again.
• Press and hold down the system button again for
4s
(see figure 5)
, until the device LED lights up
green.
• Release the system button to finish the proce-
dure.
The device will perform a restart.
Содержание HmIP-KRCK
Страница 3: ...1 F G A B C D E ...
Страница 4: ...2 3 2 1 ...
Страница 5: ...4 5 4 s click ...
Страница 6: ...4 s 7 4 s 6 ...
