44
Start-up
7.4
Teaching-in devices to the CCU3
Please read this entire section before starting
the teach-in procedure.
Your Homematic and Homematic IP device can be
conveniently controlled and configured or used in Central
Control Unit programs using a software-based method.
Therefore, they must be integrated into the system via the
WebUI. To do this, please proceed as follows:
• Start the WebUI user interface in the web browser
of your PC.
• Click the “Teach-in devices” button on the right-
hand side of the screen.
• To activate teach-in mode of the CCU3, click
on the desired teach-in window (e.g. “Teach-in
HmIP device”). The teach-in mode of the Central
Control Unit will be activated. An information box
shows how much teach-in time remains.
