HX-P230A
Instruction Manual
and Warranty
Information
1
CHAR
GE
jam: The ultimate
wireless speaker!
Thank you for purchasing
the HMDX jam wireless
speaker for smartphones,
tablets, notebook
computers and other
Bluetooth enabled
devices.
Approximately 3 hours required
for full charge. Can be charged
by using the USB to Micro USB
cord (included) through
computer or AC adapter with
USB jack (not included).
Note: Battery will last up to
4 hours when connected
wirelessly and up to 12 hours
when connected through
Aux-In Audio Jack.
Package Contents
User Manual
Charging Cord
Speaker
Charging the Unit
Controls
Indicators
Power Switch
Play/Pause Button
Volume Controls
Bluetooth Indicator
Line-In Audio Jack
Charging Port
Battery Status Indicator
CHARGE
Flashing RED
Low Battery
Charging
Fully Charged
RED
GREEN
Quick Flash BLUE Pairing Mode
Slow Flash BLUE Connected
RED
Line-in Mode
Indicator
Status
2
3
4
5
6
7
1
2
3
4
5
6
7
WIRELESS
SPEAKER
LINE IN
CHAR
GE
(when
charging)
To listen to your music over Bluetooth wireless connection, you need
to pair your device with HMDX Jam:
1. Make sure your device has Bluetooth capability.
2. Slide POWER SWITCH to turn on the unit, indicator will begin to flash.
3. Follow the instructions of your device to pair the unit.
4. Pair your device with the unit by selecting HX-P230A from your
Bluetooth listings on your device or selecting YES. If prompted,
enter “0000” as the passcode.
5. Press play on your device and use controls on the unit to adjust
desired volume.
NOTE: Once you have successfully paired your device, you typically
will not need to repeat the above steps. Please ensure the unit
source is set to Bluetooth and your device has Bluetooth enabled.
Listening to your device wirelessly over Bluetooth
®
TM