CAUTION
1
·
、
、
'"
'
,'罚
需芒筏芷::
:
,
:
符归
i�:�:·.\',':""
.
•
I
F3501
Installation & Operating Instructions for the
Owne「's Installation ,Manual
WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
THANK YOU FOR YOUR PURCHASE
Thank you for purchasing this quality product.To ensure correct function and safety, please read and save
all instructions before using the product
SAFETY RULES
1. To reduce the risk of elect
『
ic shock, insure electricity has been turned off at the circuit breaker or fuse box
before beginning.
2. All wi
『
ing must be in accordance with the National Electrical Code and local electrical codes. Electrical
installation should be performed by a qualified licensed electrician.
3. WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed
control device.
4. WARNING: To reduce the risk of fire, electric shock, or pe
『
sonal inju
『
y,mount to outlet box marked
"Acceptable for Fan Support of 45kg (99.12 lbs.) O
『
Less" and use mounting screws provided with the outlet
box. Most outlet boxes commonly used for the support of light fixtures are not acceptable for fan support and
may need to be replaced. Due to the complexity of the installation of this fan, a qualified licensed elect
『
ician
is strongly recommended.
5. The outlet box and support structu
『
e must be securely mounted and capable of reliably suppo
『
ting a
minimum of 45KGS. Use only UL Listed outlet boxes marked FOR FAN SUPPORT.
6. The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
7. Avoid placing objects in the path of the blades.
8. To avoid personal injury or damage to the fan and other items, be cautious when working around o
『
cleaning
the fan.
9. Do not use wale
『
or detergents when cleaning the fan or fan blades. A dry dust cloth o
『
lightly dampened
cloth will be suitable for most cleaning.
10. Aller making electrical connections, spliced conductors should be turned upwa
『
d and pushed carefully up
into the outlet box. The wires should be spread apart with the grounded conductor and the equipment
grounding conductor on one side of the outlet box.
11. Electrical diagrams a
『
e fo
『
reference only.
12. The fan is suitable for indoor use only.
13. Please do not use the tan in a specific environment like high tempe『atu『e environment. high
radiation environment.lampblack or other abnormal use envi『onments.
TECHNICAL INFORMATION
: �
u
01
I���
勹：：��
Rated power(motor)
I
Light CCT.
34\V
E26 4*40W(MAX.) EXCLUDE
BEFORE INSTALLATION
Unpack your fan and check the contents.You should have followings
己）
＠
1. Mounting Bracket
2. Canopy screws
3. Canopy
4. Downrod&hanger ball
5. Canopy cover
6. Coupling cover
7. Bolt
8. Lock pin
9. Top housing
1 O. Blades
11. Fan motor assembly
12. Base plate
13. Light k仆
14. Ga
「
nish nuts
15. Wood screws
16. Expansion screws
卢
17. Screw washers
18. Balance tapes
19. Remole conlrol sel
INSTALLING THE FAN
Tools Required: Ph仆lips screwdriver, Pair of pliers, straight slot screwdriver , adjustable wrench, step ladder, and wire cutters
INSTALLING THE MOUNTING BRACKET
The ce山ng fan must be installed in a location so that the blades a
「
e 300mm spacing from the tip of the blade to the nearest objects o
「
walls. When hanging the Fan REMEMBER
to tu
「
n off the powe
「
Follow the instruction below to hang your fan p
「
operly
1. For the concrete ce巾ng, drill two holes in the ceiling
and secure the mounting b
「
acket to the ceiling with two
<D 8 (distance between the two holes should be
app
「
opriate)expansion screws, flat washers.nuts
p
「
ovided and tighten with a spanne
「
2. For the wood ceiling, Secure the mounting bracket to the
ceiling is capable of carrying a load of at least 45KGS with
two long mounting screws and washers provided. Be sure
at least 30mm of the screw is threaded into the support
3. Refer to the Fig. in right for mounting when the ceiling 1s
angled max. 15 degree angle
[_
--
NOTE:Hange「after the installation must be able to withstand the weight of 45kg or more
All rights reserved
Made in China
