Control the Fan with the WINK App
INSTALLATION AND OPERATION
CEILING FAN REMOTE CONTROL
Safety Information
Warranty
CAUTION:
Incorrect wire connections will
damage this receiver.
The supplier warrants the remote control and receiver to be free from defects in workmanship and material present at
time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree
to correct such defects without charge or at our option replace with a comparable or superior model if the product is
returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing
and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper
installation or by affixing any accessories, is not covered by this warranty. Servicing performed by unauthorized
persons shall render the warranty invalid. There is no other express warranty. Home Depot hereby disclaims any and
all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent
permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as
specified in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the
above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages
arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some
states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may
not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to
state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the
warranty must be paid by the customer.
Contact the Customer Service Team at 1-855-HD HAMPTON or visit www.HAMPTONBAY.COM
Pre-Installation
TOOLS REQUIRED
Phillips
screw-
driver
Flathead
screw-
driver
Adjustable
wrench
Electrical
tape
Wire
cutter
Step ladder
Part
Description
Quantity
A
Remote control
1
B
Receiver
1
C
AAA 1.5V battery
2
D
Plastic wire connector
5
E
White painting screw
1
F
Rubber isolated pad
2
PACKAGE CONTENTS
IMPORTANT:
This product and/or
components are governed by one or more
of the following U.S. Patents: 5,947,436;
5,988,580; 6,010,110; 6,046,416, 6,210,117
and other patents pending.
Installation
1
NOTE:
The frequencies on your receiver
and hand unit have been preset at the
factory. Before installing the receiver, make
sure the dip switches on the receiver and
hand unit are set to the same frequency.
The dip switches on the hand unit are
located inside the battery compartment.
NOTE:
The battery will weaken with age
and should be replaced before leaking
takes place as this will damage the hand
unit. Dispose of the used battery properly,
keep the battery out of the reach of
children.
Setting the codes on the
remote control and receiver
Operating Fan with the WINK App
1. YOU MUST SET CEILING FAN TO HIGH SPEED
AND LIGHT KIT (IF ANY) TO ON POSITION BEFORE
OPERATING REMOTE CONTROL.
2. The supply to the remote control receiver should
be connected through a mains switch, i.e. existing
wall switch.
3. Disconnect from power supply at wall switch before
working on remote control receiver or ceiling fan.
4. Install receiver into the ceiling fan canopy of the fan
to ensure proper protection.
5. This unit is to be used for the control of ceiling fan
and in a AC110/120V 60Hz power supply only.
6. Do not install in damp locations or immerse in
water. (For indoor use only.)
7. Do not pull on or cut leads shorter.
8. Do not drop or bump the unit.
9. Do not mix old and new batteries.
10. Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc.) batteries.
NOTE:
It is imperative that the code used
for both transmitter and receiver is exactly
the same, otherwise remote controller will
not work.
Setting the Code on the Remote
□
Remove the battery cover on the back of
the remote control by pressing firmly on the
arrow and sliding the cover off.
□
Slide the code switches to your choice of
either up or down. The factory setting is up.
□
For fans with dimmable bulbs, slide the
“Light Function” switch (O/D) to the position
marked “D”. If you are using non dimmable
bulbs slide the “Light Function” switch to the
“O” position.
□
Install two 1.5V AAA batteries (included).
□
Replace the battery cover on the remote
control.
Setting the Code on the Receiver
□
Slide the code switches on the receiver to
the same positions as set on the remote
control.
Operating Your Remote Control
1
Operating the remote control
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
FCC ID: KUJCE10406, KUJCE10407
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1
2
3
ON
4
1
2
3
4
ON
D
O
Remote
Control
Receiver
Dip Switch
FCC ID: KUJCE10319
IC ID:10786A-TR221A
MADE IN CHINA
MODELO: TR221A
FCC ID: KUJCE10319
IC ID: 10786A-TR221A
HECHO EN CHINA
MODèLE: TR221A
FCC ID: KUJCE10319
IC ID: 10786A-TR221A
FABRIQUé EN CHINE
1
2
3
4
O
N
D
IP
Light Function
Switch
Press and release the
button to turn the light on or off.
1
Downloading the WINK
Application
□
Using your smart device, navigate to the
application store (Apple App Store or Google
Play). Download the free WINK app and
create an account.
2
Connecting to the WINK Hub
□
Ensure your WINK Hub is connected to WiFi
by confirming the indicator light is a solid
blue color.
□
With the app open, select “add a product.”
□
Choose the WINK Hub and follow the
instructions on the app to add your fan.
Be sure your Hub is plugged in and
within range of your fan.
3:17 PM
Wi-Fi
53%
Cancel
Help
CEILING FAN
NEXT
3
Pairing the Fan to the WINK Hub
□
When instructed, turn on your fan. Once pairing is successful,
the fan will turn on at low speed and the light will blink 5 times.
Operating Your Remote Control
4
Fan Speed
• OFF -
Turns fan off
• 1-
Turns the fan to Low speed.
• 2-
Turns the fan to Medium speed.
• 3-
Turns the fan to Medium 2 speed.
• 4-
Turns the fan to High speed.
• BREEZE- Randomly alternates fan speeds to
create an organic breeze effect.
Fan Light
• OFF/ON - Turns fan light off or on.
Select and slide to dim or brighten light.
Questions, problems, missing parts? Before returning to the store, call Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday
1-855-HD HAMPTON
HAMPTONBAY.COM
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this remote control.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item #722-493
Model #99432
-Press and release the button to turn the fan on or off.
Press and hold the button for 3 seconds to use the “walk away
time delay”; this will activate the light for 30 seconds (if you are using
dimmable bulbs the light will be activated at 50% brightness.
- Fan Speed - LED’s on the fan speed button will illuminate to the
corresponding speed.
- Press button once - turns the fan on high speed.
- Press button twice - turns the fan on medium-high speed.
- Press button three times - turns the fan on medium-low speed.
- Press button four times - turns the fan on low speed.
Press button five times - fan will turn off.
- Comfort Breeze
TM
- Press and release the button to enable Comfort
Breeze
TM
; this will change your fan speed randomly, simulating a
relaxing breeze. To cancel this feature press or .
- Timer
- While the fan is on press button once - turns on a 2 hour run timer.
- While the fan is on press button twice - turns on a 4 hour run timer.
- While the fan is on press button three times - turns on a 8 hour run timer.
- Light ON/OFF
If you are using dimmable bulbs and you have previously set the dip
switch in your remote control to the “D” position, press and hold the
button to activate the dimmer function.
CAUTION:
To reduce the risk of fire or injury, do
not use this product in conjunction with any
variable (rheostat) wall control.
NOTE:
The battery will weaken with age and
should be replaced before leaking takes place
as this will damage the hand unit. Dispose of the
used battery properly, keep the battery out of the
reach of children.
WARNING:
To avoid possible electrical shock,
turn the electricity off at the main fuse box
before wiring. If you feel you do not have
enough electrical wiring experience, contact a
licensed electrician.
NOTE:
Be sure your WINK Hub is plugged
in and within range of your fan. Refer to
Wink HUB user manual for the range.
NOTE: If using a dimmer with these lights, set dimmer at
highest setting for best results.
NOTE: Reset your fan if the pairing is taking longer than
expected. Turn off your fan for 3 seconds, then turn it back
on for 3 seconds. Repeat these steps 5 times. The light will
blink 3 times when factory reset is successful. If the pairing
failed, please reset the device to original setting and re-start
the pairing.
Off 1 2 3
4
Breeze
Off
On
FAN SPEED
FAN LIGHT
FANS
3:19 PM
Wi-Fi
53%
Fan Light Settings
• During set up, the customer is asked if the fan
has a light kit.
• If your fan has a light, select “Fan Light On.”
• If your fan does not have a light, select “Fan
Light Off.”
• Press SAVE to confirm.
Ceiling Fan
Version
Location
Set Timer
>
>
Controller
Settings
Fan Light Settings
>
Users
Owner
Add a user
Software Version
REMOVE THIS FAN
+
Hub
.
Model
Name
Master Bedroom
Status
Connected
✓
Timer
When on “fan control screen,” press settings
button in upper right corner to display the
settings panel.
• Select fan to display control panel.
• Scroll down the control panel and select “Set
Timer.”
• Scroll through the hours and minute columns
to select the duration of the timer.
• Press OK to start the timer.
Set Timer
Cancel
Ok
hours
min
3
15
CEILING FAN
Connect to Wink
3:19 PM
Wi-Fi
53%
Help
Cancel
SUCCESS!
NEXT
Wink does not manufacture this product you have connected. By proceeding,
you acknowledge and accept that Wink does not guarantee the performance of
this product you have connected to Wink.
D
C
1
2
3
4
O
N
D
IP
B
A
F
E
3
Installing the receiver
WARNING:
To reduce the risk of fire or electric
shock, remember to disconnect power. The
electrical wiring must meet all local and
national electrical code requirements. The
electrical source and fan must be 110/120 volt,
60Hz. Do not use this product in conjunction
with any variable wall control. Incorrect wire
connection can damage this receiver.
CAUTION:
If fan or house wires are a different
color, have this unit installed by a licensed
electrician.
CAUTION:
Do not install in a damp location or
immerse in water (For indoor use only). Do
not pull on or cut leads shorter. Do not drop or
bump the unit.
Installation (continued)
NOTE:
The ceiling fan must be set at HIGH
speed and light kit (if installed) should be set to
the ON position.
NOTE:
For better performance with the WINK
system, the T-Shaped antenna stick should
be mounted to the ceiling outside of the fan’s
ceiling canopy using the pre-mounted double-
stick tape and wood screw (included).
□
Position the house supply wires (AAA) to one side
of the slide-on mounting bracket; position the fan
wires (BBB) to the opposite side.
□
Insert the narrow end of the receiver (as shown, flat
side towards the ceiling) into the slide-on mounting
bracket until it rests on top of the ball/downrod
assembly. The canopy comes up to cover the
receiver and bracket.
VIEW AFTER
INSTALLATION
CEILING
WINK antenna
mount to ceiling using wood screw
WINK
antenna
Receiver antenna
AAA
BBB
WINK antenna
Receiver antenna
(Leave connected and do not cut)
2
Installing the rubber isolated pads
□
Loosen the two screws provided with the outlet
box; insert two rubber isolated pads (F) between
the mounting bracket and the outlet box; firmly
tightened the two screws.
F
Outlet box
Mounting
Bracket
Installation (continued)
4
Wiring the receiver to the household wiring
IMPORTANT:
Use the wire connecting nuts (AA) supplied with
your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
WARNING:
Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
□
Spread the wires apart so that the green and white wires are on one
side of the outlet box and the black wire is on the other side.
□
Connect the green fan wires to the household ground wire (this may
be a green or bare wire) using a wire connecting nut (AA).
□
Connect the receiver black (or red) wire to the household black (hot)
wire using a wire connecting nut (AA).
□
Connect the receiver white wire to the household white wire (neutral)
wire using a wire connecting nut (AA).
□
Secure each wire connecting nut using electrical tape.
Black
(or Red)
Black
Green
(or Bare)
Green
Outlet Box
in the ceiling
(MM)
Antenna
White
B
C (x3)
WARNING:
To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
Wiring the fan to the receiver
□
Connect the fan motor white wire to the receiver white wire
using a wire connecting nut (AA).
□
Connect the fan motor black wire to the receiver black wire
using a wire connecting nut (AA).
□
Connect the fan motor blue wire to the receiver blue wire
using a wire connecting nut (AA).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (AA) upward and push the wiring
into the outlet box (MM).
5
IMPORTANT:
Use the wire connecting nuts (AA)
supplied with your fan. Secure the connectors
with electrical tape and ensure there are no loose
strands or connections.
Outlet box
in the ceiling
(MM)
B
Blue
Antenna
Black White
Green
C (x3)
