should be powered off and unplugged
Also, remember that your Receiver
TV screen.
Satellite Dish Installation Manual (Ver. 1)
Of course, the Receiver will need to be tu
Receiver is powered on and plugged in.
your satellite Receiver by connecting
receiver's software or a signal level meter.
Section 11: Signal Measurement
While aligning your dish, you can measure your signal strength by using either
the indicator built in to your satellite
Signal strength updates every few seconds, so there will be some delay from
when you move the dish and when the change registers on the
If you can’t see the screen, have someone watch it for you during the moving
process so you can ensure the best-possible signal.
whenever connecting or disconnecting the RG-6 coax cable. You can damage
and disconnecting the RG-6 while your
rned on again in order to get a signal
reading.
17
