Caribbean Tree
Model: TG76M2Y65C00; 125187
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products
are used in outdoor applications, connect the product
to a Ground Fault Circuit Interrupting (GFCI) outlet. If
one is not provided, contact a qualified electrician for
proper installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of
heat.
e. Do not secure the wiring of the product with staples
or nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any
wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk
of fire, burns, personal injury and electric shock it
should not be played with or placed where small
children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord,
wire, or light string.
k. Do not close doors or windows on the product or
extensions cords as this may damage the wire insula-
tion.
l. Do not cover the product with cloth, paper, or any
material that is not a part of the product when in use.
m. This product has a polarized plug (one blade is wider
than the other) as a feature to reduce the risk of
electric shock. This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a quali-
fied electrician. Do not use with an extension cord
unless plug can be fully inserted. Do not alter or
replace the plug.
n. This product is equipped with push-in type lamps. Do
not twist lamps.
o. This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from
the outlet. Also unplug any additional strings or
products that may be attached to the product. Replace
the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the
product.
p .Read and follow all instructions that are on the prod-
uct or provide with the product.
q.
SAVE THESE INSTRUCTIONS
Package Contents
Pre-Assembly
Part Description Quantity
D Tree stand 1
A Tree top, tag 3 1
B Tree center, tag 2 1
C Tree bottom, tag 1 1
This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10 min-
utes!
Step 1. Remove the protective caps from the tree bottom
(C) and insert the pole into the tree stand (D).
Step 2. Remove the protective caps from the tree center
(B) and insert the pole into the tree bottom (C) .
Step 3. Insert the tree top (A) into the tree center (B).
Step 4. Shape the branches to your preference by working
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
Step 5. Insert the green label extension cord plug into
the wall outlet. All your lights should now be lit.
Step 6. When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Assembling the tree
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions
should always be followed, including the following:
The supply cord cannot be replaced. If the cord is damaged the appliance
should be scrapped.
Imported by: SERVICIOS HOME DEPOT, S. DE R.L. DE C.V.
Ricardo Margain 605. Santa Engracia, San Pedro Garza García, Nuevo León, México,
C.P. 66267 Phone 01 800 004 6633
Electrical ratings: 120V~ 60Hz 142.8 W
Assembling the tree stand
Assembly
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand (D) and lay the
stand on the floor.
Step 3. Slide the locking disk of the tree stand (D) down
until it snaps into place.
