Model# PPLNKWHT36DM
Item# 1004 674 486
TOOLS REQUIRED
Hammer
Safety goggles
Phillips screwdriver
Power drill
Measuring tape
Wall hardware
Caulk/sealant
Level
Installation
1
PREPARING FOR INSTALLATION
NOTE:
Before installation, make sure all parts are present. Compare parts with
the Hardware Included list. If any part is missing or damaged, do not attempt to
install the product.
□
Determine the desired mounting location, and mark the wall where the unit
will be installed.
NOTE:
For secure installation, the unit must be mounted to at least one wall stud.
3
POSITIONING THE CABINET
□
Move the cabinet into place, and use wood
shims to level the cabinet against the wall.
Use and
Care Guide
Vanity Combo
2
CUTTING THE OPENING FOR PLUMBING FIXTURES
NOTE:
This step applies to vanity cabinets with full back panels only.
□
Locate and mark plumbing on the back panel.
□
Drill a pilot hole through the back panel.
□
Use a keyhole saw to cut an opening for the plumbing fixtures.
4
BEFORE BEGINNING ASSEMBLY
□
Read directions thoroughly
□
Decide on right or left hand door configuration
□
Perform door / drawer swap prior to vanity installation.
HARDWARE INCLUDED
AA - Knob x 3
BB - Drawer Screw x 2
CC - Door
Screw x 1
DD - Hanging
Bracket x 2
EE - Screw x 4
HOMEDEPOT.COM
Please contact 1-888-774-8062 for further assistance.
