Home Decorators Collection HALLMAN 51759 Скачать руководство пользователя страница 15

15

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Operating Your Fan and Remote Control

Remote Control - Your fan is equipped with a remote control to operate
the speed and lights of your new ceiling fan. 

Speed setting for warm or cool weather depends on factors such as 
the room size, ceiling height, number of fans and so on.

The fan is shipped from the factory with the reversing switch (YY) 
positioned to circulate air downward. If airflow is desired in the 
opposite direction, turn your fan off and wait for the blades to stop 
turning, then slide the reversing switch (located on light box) to the 
opposite position, and turn the fan on again. The fan blades will turn in 
the opposite direction and reverse airflow.

Warm weather

 - (Forward) A downward airflow creates a cooling effect.

This allows you to set your air conditioner on a higher setting without
affecting your comfort.

Cool weather

 - (Reverse) An upward airflow moves warm air off of the

ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.

A. Warm weather

B. Cool weather

1.  

 Power ON/OFF.

 - Press and release the

   

button to turn the fan on or off.

 

Press and hold the

   

button for 5 seconds to use the “walk away time delay”; this will active the light 

for 30 seconds (the light will be activated at 50% brightness).

2. 

 Fan Speed - 

LEDs on the fan speed button will illuminate to the corresponding speed.

 - Press and release 1 time - turns the fan on high speed.

 - Press and release 2 times - turns the fan on medium speed.

 - Press and release 3 times - turns the fan on low speed.

 - Press and release 4 times - turns the fan off.

3.  

 Light ON/OFF 

 

Press and release the 

 button to turn the light on or off.

 

Press and hold the 

 button to activate the dimmer function (as long as you have NOT previously set 

O/D dip switch in your remote to the “ON” position).

4. 

 Comfort Breeze

TM 

 

Press and release the     button to enable Comfort Breeze

TM

; this will change your fan speed randomly, 

simulating a relaxing breeze. To cancel this feature press   or  .

5. 

 Timer 

 

 - While the fan is on press 1 time - turns on a 2 hour run timer.

 - While the fan is on press 2 times - turns on a 4 hour run timer.

 - While the fan is on press 3 times - turns on an 8 hour run timer.

Operating Your Fan and Remote Control

YY

L

Содержание HALLMAN 51759


















Отзывы: