Assembly —
Installing the Light Kit
10
16
Attaching the light kit mounting
plate to the mounting ring
□
The fan motor assembly (G) is shipped with motor
support plate (SS) to prevent movement during
transportation.
□
Remove the motor support plate (SS) from the
mounting ring (TT) and discard.
□
Remove one of the three light kit mounting plate
screws (JJ) from the mounting ring (TT) and loosen
the other two screws. (Do not remove.)
□
Place the key holes in the light kit mounting plate (J)
over the two screws (JJ) previously loosened from
the mounting ring (TT). Turn the light kit mounting
plate (J) until the light kit mounting plate (J) locks in
place at the narrow section of the key holes.
□
Securely tighten the two light kit mounting plate
screws (JJ) previously loosened and the one (JJ)
previously removed.
G
J
TT
JJ
SS
