Home Decorators Collection 1008366984 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 19

Home Decorators Collection 1008366984 Скачать руководство пользователя страница 9

9

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

5

Installing the mounting bracket to
the electrical box

Hanging the fan on the mounting
bracket

□

Carefully lift the fan motor assembly (G) up to the mounting

bracket (A) and seat the hanger ball/downrod assembly
(D) in the mounting bracket (A) socket. Make sure the tab
on the mounting bracket (A) socket is properly seated in
the groove in the hanger ball/downrod assembly (D). This
will help to balance the ceiling fan.

6

Assembly — Hanging the Fan

WARNING:

The tab in the ring must rest in the groove of

the hanger ball/downrod assembly (D). Failure to properly seat
the tab in the groove could cause damage to the wiring.

WARNING:

To reduce the risk of fire, electric shock or

other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.

□

Pass the 120-volt supply wires through the center

hole in the mounting bracket (A).

□

Attach the mounting bracket (A) on the outlet box by

sliding the mounting bracket (A) over the screws
provided with the outlet box. Note that the flat side of
the mounting bracket (A) is toward the outlet box.

□

Securely tighten the two mounting screws.

D

G

A

Outlet box

A

«
...
7
8
9
10
11
...
»

Содержание 1008366984




















Отзывы:

Нет отзывов