Home Decorators Collection 1004 120 942 Скачать руководство пользователя страница 18

18

Operation

REMOTE CONTROL OPERATING INSTRUCTIONS

REMOTE CONTROL OPERATING INSTRUCTIONS

N

     - Press and release the      button to turn the fan on or off.

      - Press and release 1 time - turns the fan on high speed. 
      - Press and release 2 times - turns the fan on medium speed. 
      - Press and release 3 times - turns the fan on low speed. 
      - Press and release 4 times - turns the fan off.

      - Press and release the        button to turn the light on or off.
If you are using dimmable bulbs and you have previously set O/D dip 
switch in your remote to the “D” position, press and hold the     
button to activate the dimmer function.

     - Press and hold this button for 3 seconds to enable Comfort 
Breeze

TM

; this will change your fan speed randomly, simulating a 

relaxing breeze. To cancel this feature press        or       .

      - While the fan is on press 1 time - turns on a 2 hour run timer.
      - While the fan is on press 2 times - turns on a 4 hour run timer. 
      - While the fan is on press 3 times - turns on an 8 hour run timer.

Содержание 1004 120 942























Отзывы: