Home Decorators Collection 1004 120 942, Инструкция по использованию и уходу, Страница: 13 / 22

7
Making the electrical connections
Assembly — Hanging the Fan (continued)
13 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
WARNING:
Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts, except for the ground wire.
NOTE:
The fan must be installed at a maximum distance of
20 ft. from the remote control for proper signal transmission
between the remote control and the fan's receiving unit.
WARNING:
To reduce the risk of electric shock, this fan
must be installed with an isolating wall control/switch.
AA
3-Pin
connectors
M
White
Green
Black
Black
Ground
White conductor
A
Green
NN
White Blue Black
White Blue Black
If you feel you do not have enough electrical wiring knowledge
or experience, have your fan installed by a licensed electrician.
Follow the steps below to connect the fan to your household
wiring. Use the plastic wire nuts (AA) with your fan. Secure the
plastic wire nuts (AA) with electrical tape. Make sure there are
no loose strands or connections.
□
Insert the receiver (M) into the mounting bracket (A) with
the flat side of the receiver (M) facing the ceiling.
□
Make wire connections from the fan to the receiver (M).
From Fan To Receiver
3-Pin Connector--------------- 3-Pin Connector
□
Make wire connections from the receiver (M) and fan to
the outlet box (NN) as follows, using the wire nuts (AA).
From Receiver To Outlet Box
Black Wire "AC in L" ---------- Black Wire (Hot)
White Wire "AC in N" --------- White Wire (Neutral)
From Fan and Receiver To Outlet Box
Green Wires* ----------------- Green or Bare Wire (Ground)
* There are two green grounding leads: one from the mounting
bracket (A) and one from the hanger ball/downrod assembly (E)
if installed.
□
Turn the wire nut connections upward, spreading them
apart so the green (ground) and white wires will be on
one side of the outlet box (NN) and the black and blue
wires will be on the other side. Carefully tuck the
connections up into the outlet box (NN).
3 4 1 2
ECE
E