Home Decorators Collection 1003 236 453 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 23

Home Decorators Collection 1003 236 453 Скачать руководство пользователя страница 15

9

Attaching the light kit mounting
plate to the mounting ring

Assembly — Installing the Light Kit

□

Remove one of the three light kit mounting plate

screws (JJ) from the mounting ring (SS) and loosen
the other two screws. (Do not remove.)

□

Place the key holes in the light kit mounting plate (I)

over the two screws (JJ) previously loosened from
the mounting ring (SS). Turn the light kit mounting
plate (I) until the light kit mounting plate (I) locks in
place at the narrow section of the key holes.

□

Securely tighten the two light kit mounting plate

screws (JJ) previously loosened and the one (JJ)
previously removed.

15

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

10

Attaching the LED light kit
and glass shade

CAUTION:

Before starting installation, disconnect the

power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.

□

Remove one of the three light kit mounting screws

(KK) from the light kit mounting plate (I) and loosen
the other two screws (KK). (Do not remove.)

□

While holding the 14W LED light kit (J) under the fan

motor assembly (G), make the 2-pin wire
connections:

- White to white
- Black to black

□

Place the key holes in the 14W LED light kit (J) over

the two mounting screws (KK) previously loosened
from the light kit mounting plate (I). Turn the 14W
LED light kit (J) until the 14W LED light kit (J) locks in
place at the narrow section of the key holes. Secure
by tightening the two light kit mounting screws (KK)
previously loosened and the one (KK) previously
removed.

□

Position the notches (UU) in the outer rim of the glass

shade (K) so they line up with the tabs (TT) on the
inside of the rim on the 14W LED light kit (J).
Carefully lift the glass (K) up inside the 14W LED light
kit (J) and secure it to the fan by turning the glass
shade (K) clockwise until snug. DO NOT
OVERTIGHTEN.

SS

G

I

JJ

G

J

KK

K

I

TT

UU

«
...
13
14
15
16
17
...
»

Содержание 1003 236 453
























Отзывы:

Нет отзывов