Assembling the tree stand
Assembly
Step 1
.
Choose a location near a wall outlet.
Step 2
.
Unfold the legs and lay the stand in a flat area. Then slide the
locking disc downward and snap into place.
Step 3
.
SWhen inserting the bottom section of the tree into the
assembled stand, thread the eyebolt into the stand and tighten
until the pole is firmly secured.
Package Contents
Pre-Assembly
Part Description
D Tree stand
A Tree top
B
Tree center, Sticker 2
C
Tree center, Sticker 1
Quantity
1
1
1
1
Christmas Tree
Model: TV90CH520S00
Sku # 1003 173 282
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose plugs
and/or broken, loose, or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and
life expectancy of your tree.
Step 1.
Connect the light strings of the tree together and plug the
power cord into a wall outlet.
Step 2.
If the tree comes with a foot pedal, step on the On/Off button.
Maintenance
Spare parts
This tree package includes bulbs and fuses for any replacement or repair
that you need to perform on your tree. If extra parts are needed, contact
the Customer Service Team at 1-877-527-0313 between the hours of 8 am
and 5 pm EST, Monday through Friday.
Tree top
Section 2
Section 1
Insert
green-labelled
plug into wall
outlet
Foot Pedal
on/off Switch
Insert Red Label
Plugs Into Red
Labeled Extension Cord
S100
S100
S100
S100
S100
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. This product is for indoor use only. The electrical rating is 1.70A 120V
60Hz.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place
on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extensions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that is not a
part of the product when in use.
m. Read and follow all instructions that are on the product or provided
with the product.
n.
SAVE THESE INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
Eye Bolt
Step 1. Remove the protective caps from the tree bottom (C) and insert
the pole into the tree stand (D).
Step 2. Remove the protective caps from the tree center (B) and insert
the pole into the tree bottom (C) .
Step 3. Insert the tree top (A) into the tree center (B).
Step 4. Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all wires
are free of branch hinges.
Step 5. Connect the plug(s) securely to the extension cord(s) as per the
color labels indicated in attached photo and insert the green label
extension cord plug into the wall outlet.
Step 6. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Step 7. When finished shaping the branches, slightly upsweep all branch
tips for a uniform look.
Assembling the tree
TM
Top view
Side view
