Operation
Turning on the tree
Maintenance
Spare parts
Repairing Loose Hinges
1. Before using or reusing, inspect product carefully. Discard
any products that have cut, damaged or frayed wire
insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove
all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the product
from wherever it is placed, including tree, branches, or
bushes,to avoid any undue strain or stress on the product
conductors,connections, and wires.
Cover the protective cap on the poles
to avoid damaging the internal parts.
6. When not in use, store neatly in a cool,
dry location protected from sunlight.
7.
Keep out of reach of pets and children.
Use and Care Instructions
SPARE FUSE
User servicing instructions
Fuse replacement
ChristmasTree
Model: TGA0M4B65C00
Sku # 1003 143 506
The tree
does not
light
Troubleshooting
Problem
Solution
Ensure that all tree sections are plugged into
each other and that the tree is plugged into the
wall. If your tree came with a foot pedal, step on
the On/Off button.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided.
Check for blown fuses at the light string and
power cord plugs. Replace as needed with the
replacement fuses provided.
For blown fuses (if applicable), please refer to
User Servicing Instructions – Fuse Replacement
and replace as instructed.
Top view
Side view
TM
Step 1. Remove the protective caps from the tree bottom (D)
and insert the pole into the tree stand (E).
Step 2. Continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working
from the bottom to the top. When adjusting branches,
ensure that all wires are free of branch hinges.
Step 4. Insert the green label extension cord plug into the wall
outlet. All your lights should now be lit.
Step 5. Shape the tree from the bottom to the top. Start with
the branches farthest from the pole – fan out in a star
shape, and continue until the entire tree is shaped.
Step 6. When finished shaping the branches, slightly upsweep
all branch tips for a uniform look.
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs.Replace
bulbs promptly with the replacement bulbs provided in order
to maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins,washers, bulbs, and
fuses for any replacement or repair that you need to perform
on your tree.If extra parts are needed,contact the Customer
ServiceTeam at 1-877-527-0313 between the hours of 8 am
and 5 pm EST,Monday through Friday.
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
1. Grasp plug and remove from the receptacle or other outlet
device.Do not unplug by pulling on cord.
2. Open fuse cover.Slide open fuse access cover on top of
attachment plug towards blades.
3. Remove fuse carefully.
4. Risk of fire.Replace fuse only
with 5, 7 or 10 Amp, 125 Volt
fuse for the power cord set.
5. Close fuse cover.Slide closed
the fuse access cover on top of
attachment plug.
6. Risk of fire.Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed. Discard
product if the attachment plug is damaged.
