ASSEMBLY
1 Assembling the Body
Align the two Halves of Body (C) with each other then insert the
connecting rods on one half into the connecting holes on the other
half and fasten at the connecting loops with Plastic Ties (J).
2 Assembling the Right Snow Shoe
Insert the connecting rods on the Right Snow Shoe (F) into the connecting
holes on the Right Foot connected to the Body (C) and fasten at the
connecting loops with Plastic Ties (J).
3 Assembling the Left Foot and Left Snow Shoe
Insert the connecting rods of the Left Foot (E) into the matching
connecting holes of the Left Snow Shoe (F). Insert the connecting
rods of the Left Foot (E) into the matching connecting holes on the
Body (C) and fasten at the connecting loops with Plastic Ties (J).
4 Assembling the Hat and Head
Insert the connecting rods of the Head (B) into the matching connecting
holes of the Upper Body (C) and fasten at the connecting loops with
Plastic Ties (J). Insert the connecting rods on the Hat (A) into the matching
connecting holes on the Head (B).
5 Assembling the Flippers and Scarf
Insert the connecting rods of both Flippers (D) into the matching
connecting holes of the Body (C) and fasten at the connecting loops
with Plastic Ties (J). Wrap the Scarf (G) around the neck of the
Penguin.
6 Assembling the Ground Stakes
Insert Ground Stakes (K) over the metal frame at the front and back of
each snow shoe then into the ground firmly.
C
J
C
J
F
J
F
C
E
A
B
J
C
D
J
C
G
K
