-5-
Step 1
If your model did not come with a wheel assembly,
proceed to step 2.
• Align the holes in the wheel assembly with the
holes in the base.
• Attach the wheel assembly to the base using the
bolts and nuts.
Step 2
If your model does not come with the anchoring
arms and nuts or you do not wish to attach these
items, proceed to step 3.
• Mount the anchoring arms and nuts to the holes
on the base housing using six bolts and nuts.
Step 3
• Attach the support legs to the top of the base
using three M8 bolts.
Step 4
• Attach the post support to the top of the support
legs using M6 x 22 bolts and M6 nuts.
Step 5
•
Place the tank housing on top of the assembly.
Step 6
•
Insert three reflector studs into the top of the
head assembly. Tighten the studs securely.
