HOMCOM 821-018V70, Руководство по сборке и инструкция

Страница: 19 / 129

19
8. TROUBLESHOOTING
When Please confirm Solution
The unit is
not operating.
✓
Check the power connection in
securely
.
➢
Insert the power cord securely into
the wallOutlet.
✓
Check if the water level indicator
lights up?
➢
Empty the water tank and re-install
correctly.
✓
Check the room temperature.
➢
The range of operating temperature is
5-35
℃ .
There is little
formation of
condensate.
✓
Check the air filter for dirt.
➢
Clean the air filter as necessary.
✓
Check if the air duct is blocked.
➢
To clear the obstacle.
✓
Check if the room temperature is
below 20 ℃ .
➢
This is normal. Low humidity in low
temperature environment.
✓
Set humidity level is higher than
currenthumidity value.
➢
Set the humidity level below current
humidity value.
Water
Leakage
✓
Overflow while moving the unit.
➢
Empty the water tank before
transport.
✓
Check if the drain hose is kinked or
bends.
➢
Straighten the hose to avoid a trap
existing.
Excessive
Noise
✓
Check if the unit is securely
positioned.
➢
Place the unit on horizontal and firm
ground.
✓
Check if any loose, vibrating parts.
➢
Secure and tight the parts.
✓
Noise sounds like water flowing.
➢
Noise comes from flowing refrigerant.
This is normal.
Emitting
hot
✓
The air outlet is hotter than room
temperature a bit.
➢
This is normal. The compressor
produce heat that has been removed
by the air exhausted.
Error
Code
E2
✓
Humidity sensor dampened or
failure.
➢
To clean or replace the humidity
sensor.
CL
✓
Display when Room temperature is
below 5°C
（
41°F
）
.
➢
Normal. The compressor stops, and
the fan keeps running.
CH
✓
Display when Room temperature is
above35 ℃
（
95°F
）
.
➢
Normal. The compressor stops, and
the fan keeps running.
LO
✓
Display when Room relative
humidity is bellow 20%RH.
➢
Normal. The compressor stops, and
the fan keeps running.
HI
✓
Display when Room relative
humidity is above 95%RH.
➢
Normal. The compressor and the fan
keep running.