HOMCOM 800-078, Инструкция по сборке, Страница: 8 / 22

Coffee Maker
Page 7 of 21
If the grind is too fine, the water will not flow through the coffee even under pressure. These grinds
look like powder and feel like flour when rubbed between fingers.
If the grind is too coarse, the water flows through the coffee too fast, preventing a full-flavored
extraction.
Be sure to use a quality grinder for uniform consistency.
OPERATING INSTRUCTIONS
Filling the water tank
a. Fill the water tank with water, you may either use a jar to fill it up or remove it from the unit and
then fill it up under the tap. If you have removed it from the unit to fill up with water, please
ensure you place it back tightly in its place. Fill the reservoir with the desired amount of water
ensuring it ranges within the
“MIN” and “MAX” markings on the tank. Never use warm or hot
water to fill the water reservoir.
b. Close the water reservoir lid and place it back in the unit ensuring it fits tightly.
Filling the milk tank
If you plan to prepare a cappuccino or latte, remove the milk tank from the unit, open the lid and pour
the quantity of cold milk you estimate you will need between the
“MIN” and “MAX” levels. When
done, place the milk tank back in the unit ensuring it fits tightly.
Note: You can use the of milk of your preference, i.e., whole, skimmed, semi-skimmed, organic or
soy milk.
Choosing the filter.
Select the filter to be used as follows:
A. FOR A SINGLE SHOT
– use the filter for a single shot of espresso if using ground coffee.