HOMCOM 800-078, Инструкция по сборке, Страница: 19 / 22

Coffee Maker
Page 18 of 21
Manual descaling mode
After the unit has worked for 500 cycles, it will enter descaling mode and sound an alarm. The
cappuccino and latte indicator lights will blink in turn. If you do not descale in time, the water way system
may become blocked.
Note: If you want to descale before 500 cycles, you can descale manually by following the
steps below:
Operation
1. Ensure the power switch is at the
position of “O”, and the power cord is unplugged. Fill 400ml
white vinegar and 600ml water into the water tank. Assemble the milk tank into the unit, turn
frothing control knob clockwise to clean position.
2. Press
the power switch to “I” position,
Cappuccino and Latte indicator blink in turn
. Press Espresso
button and Latte button at the same time, the unit will enter descaling mode automatically. 6
indicators blink by turning a circle anticlockwise, the frothed milk dispensing tube will flow out hot
water and steam, after 40 mins, the unit will enter standby mode, 6 indicators illuminate.
3. Discard the residual descaling solution, and clean the water tank, fill appropriate amount pure water,
brew two cups of Espresso continuously, then brew two cups of Latte continuously, the cleaning
finished. 6 indicators illuminate, the unit recover to standby mode, after the unit working for 500 cycles
again, the unit will remind descaling again.
Note: Under descaling reminding status, you still can operate the unit normally, and after
operation, it will return to descaling reminding status.