HOLZMANN MASCHINEN TAS 89M, Руководство пользователя

Страница: 31 / 41

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Strana 31
UNIVERZÁLNÍ PONORNÁ PILA / MINI PLUNGE SAW TAS 89M
14.2 Cleaning
After each workshift the machine has to be cleaned. Remove chips etc. with a suitable tool. Do
not remove them by hand (cutting injury!). Remove dust as well.
N O T I C E
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution
14.3 Disposal
Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local
dealer for a replacement unit, the latter is obliged to exchange your old.
15 TROUBLE SHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble Possible cause Solution
Machine stops or will not start
▪
ON/OFF-switch damaged
▪
Saw unplugged
▪
Overload tripped
▪
Fuse blown or circuit breaker
tripped
▪
Cord damaged
▪
Check the switch
▪
Check all power connections
▪
Allow motor to cool and reset
by pushing off switch
▪
Change fuse or reset circuit
breake
▪
Change cable
Machine slows down during
working
▪
Exerting too much pressure to
the sanding abrasive
▪
Exert less pressure on the work
piece
Work piece burns during the
working process
▪
Wrong saw blade
▪
Too much pressure
▪
Change saw blade
▪
Reduce pressure
MANY MALFUNCTIONS AND DEFECTS CAN BE AVOIDED BY LETTING THE MACHINE BE
CONNECTED TO YOUR POWER SUPPLY BY A CERTIFIED ELECTRICIAN