SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
17
NTS200FLEX
SAFETY
This section contains information and important notes on safe commissioning and handling of the
machine.
For your personal safety, please read these operating instructions carefully before
commissioning. This will enable you to handle the machine safely and prevent
misunderstandings as well as personal injury and damage to property. Also observe
the symbols and pictograms used on the machine as well as the safety and danger
information!
11.1
Intended Use of the Machine
The machine is intended exclusively for the following activities:
Grinding knives, scissors and tools out of steel within the specified machine limits and in
compliance with safety regulations.
HOLZMANN MASCHINEN
assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injuries.
11.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
max. 65 %
Temperature (operational)
+5° C bis +40° C
Temperature (Storage, Transport)
-20° C bis +55° C
11.1.2
Prohibited Use / Forseeable Misuse
-
Operation of the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine in a potentially explosive environment (machine can generate
ignition sparks during operation)
-
Operating the machine outside the limits specified in this manual
-
Remove the safety markings attached to the machine.
-
Modify, circumvent or disable the safety devices of the machine.
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
11.2
User Requirements
The physical and mental suitability as well as knowledge and understanding of the operating
instructions are prerequisites for operating the machine. Persons who, because of their physical,
sensory or mental abilities or their inexperience or ignorance, are unable to operate the machinery
safely must not use it without the supervision or instruction by a responsible person.
Please note that local laws and regulations may stipulate the minimum age of the operator and
restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.
11.3
General Safety Instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points must be observed:
Before commissioning, check the machine for completeness and function.
Choose a level, vibration-free, non-slip surface for the installation location.
Ensure sufficient space around the machine!
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects!
