HOLZMANN MASCHINEN MF5IN1, Руководство пользователя

Страница: 16 / 24

SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 16
MF5IN1
11 SAFETY
11.1 Intended Use
The device must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the device properly you must also observe and follow all safety regulations lay down in
this manual.
All people who use and service the device have to be acquainted with this manual and must be
informed about the device's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The device may only used as:
Workbench, scaffold, creeper, dolly, hand truck
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-
MASCHINEN and its sales partners cannot be made liable for ANY direct or indirect
damage.
11.2 Security instructions
Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the
operator and limit the use of this machine!!
To avoid malfunction, machine defects and injuries, read the following security instructions:
 Make sure all moving parts are free from interference
 Keep your work area dry and tidy! An untidy work area may cause
accidents. Avoid slippery floor!
 Avoid abnormal working postures! Make sure you stand squarely and
keep balance at all times
 Keep hands clear of all moving parts. Bruises!
 Protect the machine from dampness (causing a short circuit)
 When working with the machine outdoors, use extension cables suitable
for outdoor use
 Check to make sure that all fixing screws and knobs are tight and all legs
are locked into position before operating.
 Don’t use scaffold mode with legs fully extended. Always use this product
on a stable, level surface. Failure to properly or to overload may result in
serious personal injury!
 Do not overload the machine!