HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
21
KAM 65PRO
11
OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating the
device.
11.1
Operation instructions
W A R N I N G
Perform all machine settings with the machine being
disconnected from the power supply!
N O T I C E
Adjust temperature setting to the used glue granule!
Always hold the machine by the insulated handles because the
heating unit and adhesive nozzle can become very hot. Risk of
burns!
Do not open the glue pot cover or turn the glue adjustment knob
while the machine is cool
Store the machine back to the original box only when the machine
is cooled down!
11.2
Operation panel and variable speed controller
1
storage indicator light
7
switch °C (M/min)/°F (Ft/min)
2
target temperature
8
temperature lower
3
heating indicator light
9
temperature higher
4
Mode °F and Ft/min
10
heating ON-OFF
5
current temperature
11
feeding speed indicator light
6
Mode °C and M/min
12
indicator light 120°C (250°F) reached
13
variable speed controller on handle
