HOLZMANN MASCHINEN K5 315VF-2000, Руководство пользователя

Страница: 53 / 94

ASSEMBLY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 53
5-fach Kombination / combined 5-operation machine K5 315VF-2000
14.4.1 Thicknessing of workpieces
 Loosen fixing table and set the desired height of the thicknessing table with handwheel
 Current table height is shown on the scale
 Adjust the table height on the workpiece thickness minus the desired depth of cut
 Maximum depth of cut = 5 mm!
 Fix height with table setting
 Provide leverage for advancing to position "ON"
Insert the workpiece so that the work surface is facing up and
push forward.
 The workpiece is pulled through the automatic feed.
 Once half of the workpiece has been processed go to the opposite
operating side of the machine
A T T E N T I O N
Thicknessing long workpieces without support bracket:
Property damage and injury by shooting up the workpiece or the machine overturn
possible!
Therefore: long, overhanging workpieces must be supported
 If the workpiece is no longer moved by the automatic feed, pull the workpiece manually
 Off after crimp machine with stop button O and provide leverage for advancing to position
"OFF"
 Before other activities to wait until planer stands still!
 For planing, the machine must be rebuilt undo.
14.5 Working with the mortiser (Option)
 Clamp Required milling tool with chuck
A
of the planer.
 Workpiece on Langlochbohrtisch hang up.
 Workpiece clamping device B side until clamping foot
rests in the center of the workpiece.
 Clamping the workpiece by pivoting the lever.
A
B