HOLZMANN MASCHINEN HUB15FLEX 24V, Руководство по эксплуатации

Страница: 23 / 34

CLEANING, MAINTENANCE, STORAGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
23
HUB15FLEX_24V; HUB15MOVE_24V
Forward/Reverse:
To drive forwards (V) turn the selector switch forwards, to drive backwards (R) turn it in the
opposite direction. The greater the angle of rotation, the higher the achievable driving speed.
To set the machine in motion, pull the drawbar into the swivelling range M.
The travel distance can be changed by swivelling the drawbar to the right or left.
16.5 Stop the machine
Hub15Move_24V
The movement of the machine can be stopped as follows:
1. Release tiller arm (electric regenerative braking)
2. Move tiller arm into swivel range B (see illustration above).
3. Move tiller arm to the lowest position
4. Press the off switch (only for emergencies!)
16.6 Charging the battery
W A R N I N G
Observe the safety instructions.
1. Disconnect the plug form the battery.
2. Connect to the charger.
3. Battery can be charged inside or outside of
the machine.
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
17.1 Cleaning
H I N W E I S
The use of solvents, aggressive chemicals or abrasives can lead to damage to
paintwork and other property on the machine!
Free the machine from dust and other deposits after each use. Only use water and, if necessary,
a mild detergent for cleaning! The use of compressed air or high-pressure cleaners is not
recommended. The latter can reduce the operational suitability of the machine or shorten its
service life, because water (moisture) could get inside the machine when it is used.
V
R