HOLZMANN MASCHINEN HUB 25T, Руководство пользователя

Страница: 17 / 29

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 17
HUB 25T | HUB 25T E
CO
D. If the fork does not lift when pumping in the lifting position, turn the adjusting nut
counterclockwise until the fork lifts while pumping in the lifting position. Then check the
lowering and lifting positions.
16 OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.
16.1 Operation Instructions
N O T I C E
 Never load the low lift pallet truck when the fork is lifted.
 Move the fork under a pallet and lift the load by pumping.
 The load must be equally distributed on both fork blades.
 Transverse storing and lifting of long objects is not allowed.
 To load only the fork tips, e.g. for lifting a machine is prohibited.
 The machine may only be operated on a flat and hard surface.
 Move the load as close to the ground as possible while respecting the clear height
 Drive at a reasonable speed to be able to stop at any time.
 The pallet truck to be always parked on a flat surface and the for to be always
lowered all the way down.
 For transport the machine must be professionally loaded and sufficiently secured
(e.g. using wedges, straps, etc.), e.g. on a lorry, trailer.