HOLZMANN MASCHINEN HOB 410PRO, Руководство пользователя

Страница: 33 / 65

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 33
HOB 410PRO
13.4.3 Planing of short workpieces
 At planing short workpieces a push stick has to be used!
 Adjust the angle stop and blade cover to the size of the
push stick.
 Slide the workpiece with the push stick evenly over the
blade shaft.
13.4.4 Planing of workpieces with small cross-section
 When planing workpieces with small cross-section, it is
necessary to mount a wooden assistant stop!
 Mount the wooden assistant stop with clamps like shown
on the right picture.
 Lay the workpiece to the planer table and press it with
one hand to the wooden assistant stop.
 Slide the workpiece with the other hand evenly over the
blade shaft.