HOLZMANN MASCHINEN FS160SOLID, Руководство по эксплуатации

Страница: 28 / 48

TRANSPORT
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 28
FS160SOLID
C A U T I O N
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
N O T I C E
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
TRANSPORT
W A R N I N G
Damaged or insufficiently strong hoists and load lifting equipment may result in
serious injury or even death. Always check hoists and load lifting equipment for
adequate load-bearing capacity and perfect condition, secure the loads carefully and
never stand under lifting loads.
To ensure proper transport, also observe the instructions and information on the
transport packaging regarding centre of gravity, attachment points, weight, means of
transport to be used and the prescribed transport position, etc..
NOTICE: To lift the machine, you need a forklift truck (D), pallet truck (F) with the
appropriate load capacity and a fork of at least 1200 mm length or a crane.
The fork (G) of the truck should be positioned under the machine as shown in the
illustration on the left.
If you are using a crane (E), proceed as follows:
 Prepare two pieces of ropes or belts (H) with appropriate load-bearing capacity and
length;
 Hook the ropes to the crane hook;
 Attach the ropes as shown on the picture above.
 Position the crane so that the machine can be lifted without tipping.
 Gently lift the machine to avoid shocks and load fluctuations and carefully transport it to
the installation site.