HOLZMANN MASCHINEN ED1080ADIG, Руководство пользователя

Страница: 47 / 121

SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 47
ED1080ADIG
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.
15.3 Safety devices
The machine is equipped with the following safety devices:
 A self-locking Emergency Stop button on the
headstock to stop dangerous movements at any time.
 A jaw chuck guard (1) with position switch. The
machine only switches on when the jaw chuck guard
is closed.
 A protective cover on the headstock with position
switch (2). The machine only switches on when the
protective cover is fitted.
 A spiral spring as a protective cover on the leadscrew
(prevents clothing from being drawn in).
 An overload clutch on the feed spindle.
15.4 General safety instructions
To avoid malfunctions, damage and health hazards when working with the machine, the following
points must be observed in addition to the general rules for safe working:
 Before start-up, check the machine for completeness and function. Only use the machine if
the guards and other non-parting guards required for machining have been fitted, are in
good operating condition and have been properly maintained.
 Choose a level, vibration-free, non-slip surface for the installation location.
 Ensure sufficient space around the machine!
 Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
 Ensure a clean working environment.
 Only use perfect tools that are free of cracks and other defects (e.g. deformations).
 Remove tool keys and other adjustment tools before switching on the machine.
 Keep the area around the machine free of obstacles (e.g. dust, chips, cut parts, etc.).
 Check the strength of the machine connections before each use.
 Never leave the running machine unattended. Switch off the machine before leaving the
working area and secure it against unintentional or unauthorised recommissioning.