CHYBA! POMOCÍ KARTY DOMŮ POUŽIJTE U TEXTU, KTERÝ SE MÁ ZDE ZOBRAZIT, STYL
ÜBERSCHRIFT 1.
HOLZMANN Maschinen Austria
www.holzmann-maschinen.at
Seite 31
Metalldrehbank/Metal turning lathe ED1000F
1.26.2
Gearbox
Remove the end cover to expose the filling plug. Through it the shell tellus 32 is filled to the oil
level in the oil gauge glass regularly. The first oil change should be made after three months, the
change it once a year.
1.26.3
Apron
The oil bath is filled with shell tellus 32 through the filling plug on the right side of the apron.
Check the oil level in the oil gauge glass on the front regular. The first oil change should be made
after three months, then change it once a year. For exchanging the oil, drain away oil by taking
off the drain plug on the bottom of the apron.
1.26.4
Change gears
Lubricate the change gears with thick machine oil or grease once a month.
1.26.5
Other parts
There are other lubricating points on the input shaft bracket of the gearbox, the handwheel on
the apron, the longitudinal and cross slide, the thread dial indicator, the tailstock and the bracket,
use the grease gun to put a few drops of oil from time to time. Lubricate the apron worm and
worm gear, half nut and leadscrew twice a month. Apply a light oil film to the bed way and all
other bright parts like the tailstock quill, feed rod etc once a day.
