OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Seite 44
METALLDREHMASCHINE / METAL TURNING LATHE ED 1000N / ED 1000NDIG
14.4
Selecting feed
14.4.1
Manual operation
The bed carriage is moved by the handwheel (
27
), the cross slide, use the handwheel (
26
) and
the top slide through the handwheel (
21
).
14.4.2
Automatc feed
With the
4
selectors (
1
) the individuell positions are set to be displayed for the
corresponding value.
The feed values are based on longitudinal feed or cross feed.
The desired values are set with different selectors.
The number of teeth of change gears are set accordingly.
See the left side.
The longitudinal or cross feed is performed with the lever
(
22
)
-Longitudinal feed ready-
change gears
- Number of teeth -
selector switch setting
selector switch
22
selector switch setting
Содержание ED 1000GDIG
Страница 89: ......
