HOLZMANN MASCHINEN BT46ECO, Руководство пользователя, Страница: 24 / 114

ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 24
BT46ECO
 Hazard of electric shock
Undetected malfunctions in the power supply and/or the connected wood working machine
might result in electric shock when touching the machine. Ensure proper electric installation,
and let it check periodically by a trained electrician.
 Danger due to unintended machine start-up
Eliminate this risk by disconnecting the machine before you perform any checks or activities
on the machine.
 Hazard of inhaling toxic dust
Especially wood dust arising from chemically treated wood and/or lacquer/paint are harmful
when inhaled. Therefore wear a suitable breathing mask if required.
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge and
experience.
ASSEMBLY
Check right after receiving the machine, whether all parts according to the parts list are complete and
without damage. Each visible defect and in particular wrong amounts and transport damages must be
clearly noted on the delivery documents, otherwise the goods shall be considered as taken over and
fully accepted under the sole responsibility of the customer.
Assembly
Disc sander (fig.a)
 Fit the feet (2) to the underside of
the machine.
 Fit the protective cover to the shaft.
 Secure the protective cover with
three screws.
 Fit the disc sander to the shaft.
 Tighten the disc sander using the
Allen key.
 The sand paper sheets are affixed
using hook and eye tape
connections. Align the sand paper
sheet carefully and press firmly onto
the disc sander.
 Secure the lower disc protector with
four screws

worktable (fig.b)
 Fit the bolt (15) into the table
support (3). To avoid the trapping of
fingers or workpieces between table
and grinding wheel, the distance
between table and grinding wheel
may be max.2mm!