HOLZMANN MASCHINEN BT46ECO, Руководство пользователя, Страница: 27 / 114

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 27
BT46ECO
Operation
13.3.1 Belt sander (fig.h)
The belt sand can be turned through 90°.
 Undo the locknuts (23).
 Rotate the belt sander (9) by 90°
upwards as far as it will go.
 Tighten the locknuts (23).
13.3.2 Sanding disc (fig.i)
 Undo the holding nut (4) and adjust
the table console (5) to the required
angle of tilt. The set angle can be read
off using the scale (24).
 Tighten the holding nut (4) back up
again.
 Loosen the locking knob (25) and set
the miter gauge (6) to the desired
position.
Retighten the locking knob (25).
13.3.3 ON/OFF (fig.j)
 To switch on, push the green button („I‟).
 To switch off, push the button („O‟).