HOLZMANN MASCHINEN 10505851, Руководство пользователя

Страница: 17 / 26

MAINTENANCE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 17
RWH 150XLIFT
15 MAINTENANCE
The machine does not require intense maintenance. However, to ensure a long lifespan, we
strongly recommend following the upkeep and maintenance plan.
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
N O T I C E
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance
deficiencies can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
Store the machine in a closed, dry location.
15.1 Adding oil
 Place the jack on an even ground and set the lift arm to the lowest position.
 Set handle to the top position
 Remove oil filling screw
 Add high grade hydraulic oil (HLP 15)
( ATTENTION! Do not move the handle or foot pedal when adding the hydraulic oil!)
 Replace and tighten the oil filling screw
15.2 Bleeding
 Loosen the oil filling screw
 Slowly turn the release screw counterclockwise
 Pump the handle up and down quickly several times to purge air from the system.
 Tighten the oil filling screw
15.3 Cleaning
N O T I C E
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Put on all coatless flats a thin coat of oil.
15.4 Disposal
Do not dispose the machine, machine components fuel and oil in residual waste. Contact
your local authorities for information regarding the available disposal options. When you
buy at your local dealer for a replacement unit, the latter is obliged to exchange your old.