Rev. 1.00
6
December 13, 2018
Rev. 1.00
7
December 13, 2018
Gang-Writer8-8 User’s Guide
Gang-Writer8-8 User’s Guide
2.2 Offline Programming Mode
Offline Programming Data Download
Connect the programming module to a PC via a USB cable. After the module has successfully
connected, open the desired file and download it, as shown in Figure 6. Refer to appendix
HoltekEWriterUsersGuide(125).pdf
for the specific software operation procedures. When the offline
data download has successfully completed, the STATUS LED will remain on.
Figure 6. Offline Programming Data Download – Single Module
Offline Programming
After a 5V/3A power is connected, the STATUS LED will remain on. Press the START key to
implement programming. The programming states can be observed by the corresponding LEDs.
Figure 7. Offline Programming – Single Module
