manualshive.com logo in svg

Holtek BS66F340, Руководство пользователя, Страница: 212 / 242

Поделиться
Скачать
Holtek BS66F340 Скачать руководство пользователя страница 212

Rev. 1.60

212

August 20, 2019

Rev. 1.60

213

August 20, 2019

BS66F340/BS66F350/BS66F360/BS66F370

Touch A/D Flash MCU with LED Driver

BS66F340/BS66F350/BS66F360/BS66F370

Touch A/D Flash MCU with LED Driver

LVD Interrupt

The Low Voltage Detector Interrupt is contained within the Multi-function Interrupt. An LVD 
Interrupt request will take place when the LVD Interrupt request flag, LVF, is set, which occurs 
when the Low Voltage Detector function detects a low power supply voltage. To allow the program 
to branch to its respective interrupt vector address, the global interrupt enable bit, EMI, Low Voltage 
Interrupt enable bit, LVE, and associated Multi-function interrupt enable bit, must first be set. When 
the interrupt is enabled, the stack is not full and a low voltage condition occurs, a subroutine call to 
the Multi-function Interrupt vector, will take place. When the Low Voltage Interrupt is serviced, the 
EMI bit will be automatically cleared to disable other interrupts. However, only the Multi-function 
interrupt request flag will be also automatically cleared. As the LVF flag will not be automatically 
cleared, it has to be cleared by the application program.

EEPROM Interrupt

The EEPROM Write Interrupt is contained within the Multi-function Interrupt. An EEPROM 
Write Interrupt request will take place when the EEPROM Write Interrupt request flag, DEF, is set, 
which occurs when an EEPROM Write cycle ends. To allow the program to branch to its respective 
interrupt vector address, the global interrupt enable bit, EMI, EEPROM Write Interrupt enable bit, 
DEE, and associated Multi-function interrupt enable bit must first be set. When the interrupt is 
enabled, the stack is not full and an EEPROM Write cycle ends, a subroutine call to the respective 
Multi-function Interrupt vector will take place. When the EEPROM Write Interrupt is serviced, the 
EMI bit will be automatically cleared to disable other interrupts. However, only the Multi-function 
interrupt request flag will be automatically cleared. As the DEF flag will not be automatically 
cleared, it has to be cleared by the application program.

TM Interrupt

The Compact, Standard and Periodic TMs have two interrupts, one comes from the comparator A 
match situation and the other comes from the comparator P match situation. All of the TM interrupts 
are contained within the Multi-function Interrupts. For all of the TM types there are two interrupt 
request flags and two enable control bits. A TM interrupt request will take place when any of the TM 
request flags are set, a situation which occurs when a TM comparator P or A match situation happens.
To allow the program to branch to its respective interrupt vector address, the global interrupt enable 
bit, EMI, respective TM Interrupt enable bit, and relevant Multi-function Interrupt enable bit, MFnE, 
must first be set. When the interrupt is enabled, the stack is not full and a TM comparator match 
situation occurs, a subroutine call to the relevant Multi-function Interrupt vector locations, will take 
place. When the TM interrupt is serviced, the EMI bit will be automatically cleared to disable other 
interrupts. However, only the related MFnF flag will be automatically cleared. As the TM interrupt 
request flags will not be automatically cleared, they have to be cleared by the application program.

Interrupt Wake-up Function

Each of the interrupt functions has the capability of waking up the microcontroller when in the 
SLEEP or IDLE Mode. A wake-up is generated when an interrupt request flag changes from low 
to high and is independent of whether the interrupt is enabled or not. Therefore, even though these 
devices are in the SLEEP or IDLE Mode and its system oscillator stopped, situations such as 
external edge transitions on the external interrupt pins, a low power supply voltage or comparator 
input change may cause their respective interrupt flag to be set high and consequently generate 
an interrupt. Care must therefore be taken if spurious wake-up situations are to be avoided. If an 
interrupt wake-up function is to be disabled then the corresponding interrupt request flag should be 
set high before the device enters the SLEEP or IDLE Mode. The interrupt enable bits have no effect 
on the interrupt wake-up function.

Содержание BS66F340



















































































































































































































































Отзывы:

Нет отзывов