HOLOPLOT MD80-S, Пользователь

Страница: 43 / 45

43 X1 MD80-S Manual 1.0 en
WEEE DECLARATION
(DISPOSAL)
Electrical and electronic equipment must be
disposed of separately from normal waste at the
end of its operational lifetime. Please dispose
of this product according to the respective
national regulations or contractual agreements.
If there are any further questions concerning
the disposal, please contact HOLOPLOT.
Manufacturer’s Declarations
EU DECLARATION OF CONFORMITY
(CE SYMBOL)
Holoplot GmbH hereby declares that
this product is in compliance with the
requirements and relevant provisions of
Directive 2014/53/EU and all other applicable
EU directive requirements. A detailed
declaration is available on request.
Manufacturer’s Declarations
FCC STATEMENT OF CONFORMITY
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at their
own expense.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
INDUSTRY CANADA (IC)
STATEMENT OF CONFORMITY
This Class A digital apparatus complies with Canadian
ICES-003. / Avis de conformité à la réglementation
D’industrie Canada: Cet appareil numérique de la classe
A est conforme à la norme NMB-003 du Canada.