manualshive.com logo in svg

Hologic ThinPrep 5000, Руководство оператора, Страница: 185 / 346

Поделиться
Скачать
Hologic ThinPrep 5000 Скачать руководство пользователя страница 185

ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual      

6.51

6

U

SER

 I

NTERFACE

The instrument removes the vial from slot 1 of the carousel and scans the vial ID to check that the 
scanned ID matches the vial ID barcode configuration set up on the instrument. 

 Figure 6-66   Test vial ID settings

When the vial ID is properly configured, return to the summary screen and save the changes.

Configure Slide ID

Note:

  Particular components, available through Hologic Technical Support, are required to etch the 

EAN-13/JAN and Codabar 1-D barcode types and the QR Code 2-D barcode type. 

If the vial ID on the vial does not match the criteria 
configured for the vial ID, the screen display 
reports that the instrument failed to read the vial 
ID. Correct the vial ID on the label or correct the 
vial ID configuration before processing samples.

Successful Vial ID configuration. The vial ID con-
figuration information matches the vial label that 
was scanned. In this example, the vial ID has an 
accession ID is “60” and there are two additional 
fields in the vial ID besides the accession ID. This 
configuration matches a vial printed with 
“60|7672999|9” on the vial label.

Содержание ThinPrep 5000



























































































































































































































































































































































Отзывы:

Нет отзывов