Hologic Affirm, Руководство пользователя

Страница: 26 / 70

Affirm User Guide
Chapter 3: How to Install or Remove the System
Page 16 MAN-03209 Revision 005
3.1.2 How to Attach the Biopsy Control Module
The Biopsy Control Module attaches to either the left or right handle on the Biopsy
Guidance Module.
Figure 8: Attachment of the Biopsy Control Module
Figure Legend
1. Lock Knob for Articulating Arm
2. Biopsy Control Module Cable
3. Clamp Adjust Knob
4. Attachment Bracket
5. Attachment Bracket Lock
1. Release the Articulating Arm Lock Knob (item 1).
2. Position the Attachment Bracket (item 4) until the side with the Lock (item 5) is on the
front side of the handle.
3. Attach the Lock side of the Attachment Bracket around the lower end of the handle.
4. Slide the opposite side of the Attachment Bracket around the handle. The Bracket
attaches on to the patient handle.
5. If necessary, adjust the Clamp Adjust Knob (item 3).
6. Push the Attachment Bracket Lock to the locked position (item 5).
7. Make sure that this adjustment holds the bracket in position. If the bracket moves, or
you cannot get the bracket lock completely into the locked position, adjust with the
Clamp Adjust Knob (item 3).
8. Connect the Biopsy Control Module Cable (item 2) to the Biopsy Guidance Module.