Hologic Affirm MAN-02866, Инструкция по эксплуатации

Страница: 26 / 64

Affirm Instructions for Use
Chapter 2
—
How to Install or Remove the System
Installation of Components
10
Part Number MAN-02866
1.2 How to Attach the Biopsy Control Module
The Biopsy Control Module attaches to either the left or right handle on the Biopsy
Guidance Module.
Figure 8: Attachment of the Biopsy Control Module
Figure Legend
1. Lock Knob for Articulating Arm
2. Biopsy Control Module Cable
3. Clamp Adjust Knob
4. Attachment Bracket
5. Attachment Bracket Lock
1. Release the Articulating Arm Lock Knob (item 1).
2. Position the Attachment Bracket (item 4) until the side with the Lock (item 5) is on the
front side of the handle.
3. Attach the Lock side of the Attachment Bracket around the handle.
4. Slide the opposite side of the Attachment Bracket around the handle. The Bracket
attaches on to the patient handle.
5. If necessary, adjust the Clamp Adjust Knob (item 3).
6. Push the Attachment Bracket Lock to the locked position (item 5).
7. Verify that this adjustment holds the bracket in position. If the bracket moves, or you
cannot get the bracket lock completely into the locked position, make adjustments
with the Clamp Adjust Knob (item 3).
8. Connect the Biopsy Control Module Cable (item 2) to the Biopsy Guidance Module.