Traveler
Hitch Rack
Assembly and Use Instructions for Traveler Series Racks
HR6000 3-
Bike Rack for 2” receiver
HR6100 3 Bike Rack for 1-1/4” receiver
HR8000 4 Bike Rack for 2” receiver
HR8100 4 Bike Rack for 1-1/4” receiver
HR9200 5 Bike Rack for 2” receiver
Warning!
This product
NOT
to be used on any trailer or trailered vehicle.
Drive slowly when using the rack on bumpy or dirt roads.
Check the rack bikes and straps regularly during use.
If you have any questions or installation problems, please see your Hollywood Racks retailer or
contact Hollywood Engineering at 800-747-4085.
3.
Hitch Insert Tube (Fig. 3 ) and Upright beam assembly
4.
Two Support arms with bike cradles and anti-sway blocks attached (Fig. 5 and 6).
5
. One long attachment/
safety strap
(86” long) – Not shown.
After opening the
Traveler
box, you
should have the following parts:
1.
Parts bag including two male knobs
and two spacer blocks. (Fig. 1)
.
2.
Parts bag including: threaded hitch
pin, hitch pin clip, star and flat washers,
¾” head through bolt, large washers and
self-fastening (nyloc) nut. (Fig. 2)
