HOLLAND LIFT B-165DL25 4WD/P/N, Руководство пользователя

Страница: 41 / 48

HL-190 D25 4WD/P/N / HL-220 D25 4WD/P/N

B-165DL25 4WD/P/N / B-195DL25 4WD/P/N

Rev. A
5/2/18
Page 41
8.2.3
Tightening torques
8.3
Maintenance procedures
8.3.1
Installing and removing the safety brackets
Introduction
The safety brackets prevent people from becoming trapped in the scissor mechanism when carrying
out work on the scissor lift.
1.
Safety bracket
2.
Lock bolt
3.
Stop
4.
Axle stump
Bolt connection Tightening torque
Swivel axle’s drag rod 41 Nm
Control cylinder on the drag rod 41 Nm
Control cylinder on the bottom carriage 60 Nm
Wheel nuts 250 Nm
Gear casing on the swivel axles 200 Nm
Gear casing on the rear axle 210 Nm
Fixed part of the rear axle on the bottom carriage 390 Nm
Oscillating axle’s shackle pin 240 Nm
Prop cylinder’s assembly links 300 Nm
Safety bracket