User Manual
Version 1.0 14
8.3 Temperature Controller Detailed Operation
8.3.1 Switch On
1. Connect power according to the power outlet
2. Turn
‘ON’ the instrument by pressing the
‘ON/OFF’
button and the screen will light
up. Display shows the
‘initialization sequence’ prior to the instrument being ready for
use.
NOTE:
Every time you turn ‘ON’ the instrument it
‘beeps intermittently’
, the icon of a visual
alarm and the word “end” will appear on the display indicating that a heating cycle has
been done before. Press any button to silence.
8.4 Setting of Parameters
8.4.1 Time Settings
1. After confirming temperature, the last value of the set time (Timer) will start to flash.
Set the desired value (hh:mm) by pressing the
or
keys. It is possible to move
faster between the digits by using the
button.
2.
Confirm the set value with another press of the
button.
NOTE:
The value
“00:00”
indicates the operating mode is ‘continuous’, meaning once
you start the operating cycle by the START / STOP button, the system will continue to
maintain the set temperature until it is manually stopped.
3.
If you set the timer, such as one hour, the instrument will reach the set temperature
and maintain it for one hour.
8.5 Temperature Setting
1
.
When the instrument is switched on, press the
button one time and the set
temperature value will start to blink. Set the desired temperature value (in Celsius
degrees) by pressing the up and down arrow keys.
2
．
The
button works for a quick movement between the digits.
3
．
Confirm the set value with another press of
button.
