Holder Tractor C992, Руководство по эксплуатации, Страница: 57 / 129

7. Task-Oriented Procedures
48
Heating rear-view mirror
This procedure provides instructions on how to heat the rear-view mirror . This option is available if the
winter package is installed on the tractor.
To heat the rear-view mirror:
1. Ensure that the engine is running.
2. Turn on the mirror heater switch. The mirror heater switch illuminates.
3. Once the rear-view mirror is clear, turn off the mirror heater switch.
Heating windscreen
This procedure provides instructions on how to heat the windscreen. This option is available if the
winter package is installed on the tractor.
To heat the windscreen:
1. Ensure that the engine is running.
2. Turn on the windscreen heater switch. The windscreen heater switch illuminates.
3. Once the windscreen is clear, turn off the windscreen heater switch.
Heating/ventilating/air-conditioning cab
This section provides instructions on how to control temperature and air flow in the cab.
Before heating/ventilating/air-conditioning the cab:
1. Ensure that the engine is running.
To heat the cab:
1. Turn the heating dial to the right.
2. Adjust the temperature in the cab with the heating dial to the left to decrease the temperature, and
turn it to the right to increase the temperature.
To ventilate the cab:
1. Turn on the blower fan switch.
Note:
The blower fan switch has three sequential positions that correspond to the following:
position 0 - blower fan off, position 1- low speed, position 2 - high speed.