Holder Tractor C992, Руководство по эксплуатации, Страница: 111 / 129

11. Maintenance Procedures
102
During installation, observe that there will not be any crushing of limbs. Always wear personal
protection (goggles, protective gloves) during assembly work).
Cabin can fall down
Carefully and evenly lift the tractor cabin.
Work below the the lifted cabin is permitted only with additionally attached supports. Take care that no
connections between the cab and the underbody are damaged.
The cabin may fall down.
If you disregard these guidelines, there is a possibility of severe or fatal injuries or damage to the tractor.
Warning – cab is moving
Working under the raised tractor cab is permitted only with additional support. Use support rod (3) for
bracing and secure it with split securing pin (4).
If you disregard these guidelines, there is a possibility of minor injuries or damage to the tractor.
The cab can be tilted for repair and maintenance work.
1. Unscrew nuts (1) and retaining plate on the rear side of the cab.
2. Fix an eyebolt* M14 (2) to the top of the cab frame.
3. Attach a hook or a cable and slowly lift cab with a crane.
4. Remove support rod (3) from the holder, insert it into the tractor frame and hold it with securing pin
(4).
Lowering
1. Remove additional support.
2. Slowly lower cab.
3. Introduce the bolts into the receiving blocks and secure the cab with the washers and bolts.
* Optional equipment (available from specialty dealers)
Lowering cab
This procedure provides instructions on how to lower the cab.