
Black plate (18,1)
Holden Volt Owner Manual (Holden-Localizing-Holden-7337564) - 2014 -
CRC - 11/8/13
10-18
Vehicle Care
3. Fill the coolant surge tank with
the proper mixture to the cold
fill line.
4. Replace the pressure cap tightly.
{
Caution
If the pressure cap is not tightly
installed, coolant loss and
possible engine damage may
occur. Ensure the cap is properly
and tightly secured.
Engine Overheating
The vehicle has an indicator to warn
of engine overheating.
If the decision is made not to lift the
bonnet when this warning appears,
get service help right away.
If the decision is made to lift the
bonnet, make sure the vehicle is
parked on a level surface.
Then check to see if the engine
cooling fans are running. If the
engine is overheating, the fans
should be running. If they are not,
do not continue to run the vehicle
and have the vehicle serviced.
{
Caution
Running the engine without
coolant may cause damage or a
fire. Vehicle damage may not be
covered by the New Vehicle
Voluntary Warranty.
Washer Fluid
What to Use
When adding windscreen washer
fluid to the vehicle, be sure to read
the manufacturer's instructions
before use. If operating the vehicle
in an area where the temperature
may fall below freezing, use a fluid
that has sufficient protection against
freezing.
Adding Washer Fluid
Open the cap with the washer
symbol on it. Add washer fluid until
the tank is full. See
Compartment Overview on
page 10-7
for reservoir location.